CV Boot Joint Remover Separator Splitter Puller Propshaft Transmission AT655 Hex Socket Bits

CV Boot Joint Remover Separator Splitter Puller Propshaft Transmission AT655 Hex Socket BitsProfessional tool for commercial or occasional use. When a CV boot or gaiter is split instead of dismantling the front axle and drive shaft assembly, and keeps hands free for releasing retaining clip. Simply to use tool for accurate and time saving labour. Suitable for most vehicles. Installs flexible steering and CV boots without removing axle from the vehicle or the CV joint from the axle. The diameter of shaft hole is 30mm. Total width 140mm. Range

992" (76mm)

antifreeze

850ml abrasive canister with easy detaching for quick refills

Sprung levers on back plates

• 1 x 1/4” Drive ratchet = total length – 150mm

Features cast iron body and steel handle

helping other road users judge your speed and distance more accurately

Forward and reverse lever at the flick of a button

Can be used with a 19mm spanner or socket

Normally used with a ratchet but if you have a long stud then you can let the stud pass through the extractor and use a spanner

90 teeth mechanism also gives you greater control and a smoother ratchet action

High quality puller suitable for gears